Fatsac - Flyhigh FatSac Fat Seat for Direct Drive Boats - 1,250 lbs. W710
The Fly High Pro X Series Fat Seat Sac is designed to add a massive amount of weight to direct drive boats that have a removable rear seat.
The Fly High Pro X Series Fat Seat Sac is designed for inboard boats that have a removable rear seat. The Fat Seat is huge and it’s strong enough to sit and walk on. It has two arms that extend forward on either side of the engine compartment to add even more weight to the stern of the boat.
The Fat Seat is designed for one location in direct drive boats, it delivers over 1,500 lbs. of wake shaping ballast. Remember that it's important to weight the boat evenly to maintain proper handling and to get the best wake, so you'll definitely need to add some ballast to the front of the boat if you're going to use the Fat Seat Sac.
Dimensions: Body- 26 x 63 x 13 Arms- 58 x 13 x 13
Weight when full: 1,250 lbs - 691 kgs.
FATSAC's are proudly made in the U.S.A. in Milwaukee, Wisconsin. Their Pro X Series Quick Connect fat sacs are made of a 3 layer Valmex material, which is similar to the materials used in making river rafts and inflatable boats. The extreme durability means it is nearly impossible to puncture these bags. These bags are handmade with strict quality control. The extra wide seams are welded and taped. Fatsac is the only ballast company that makes the extra step to tape the seams, making one more layer of protection against any malfunction. This attention to detail and quality is the reason most boat manufacturers use them for their OEM bags, in fact if you have a wake boat with stock ballast from the past 10 years I can almost guarantee there is already a fatsac in it whether you know it or not. Fatsac has long been a pioneer in wakesurfing and wakeboarding and is considered the original wake ballast co.
Don't Forget A Pump!
In order to fill up your new ballast bag you will need a Fatsac Supa Tsunami Pump.
‘05 Centurion T5
I have a 2005 Centurion T5 Direct Drive outfitted with a Fatsac fat seat and a Swell H3X plus wakeshaper. It puts out an awesome wave! For my son I have mounted the wakeshaper as far back as possible on the hull and as low as possible for my son who likes a taller wave. My daughter likes the wave a little flatter so when she is riding I move the wakeshaper a bit more towards the bow to achieve that. The HX3 plus allows for endless adjustments in all directions in order to achieve the best wave possible for your individual boat. So if you have a direct drive boat you can have an excellent wave to enjoy the water! wakeshaper as far back as possible on the hull for my son who you see in the video. My daughter likes the wave a little flatter so when she is riding I move the wakeshaper a little closer to the bow to achieve this. The HX3 plus allows for endless adjustments in all directions in order to achieve the best wave possible for your individual boat to give you an excellent wave without purchasing a new boat which is always nice! Happy boating!
Not great for smaller boats
I bought this item in the hopes of kicking up a large wake. Unfortunately when full it sinks the boat too far and water comes over the side. Also as there are no baffles internally if you remove some of the water to say half full then there is too much weight shift when cornering it makes the boat virtually undrivable. Mastercraft pro star 190 5.7 v8
Perfect Fit and extra notes
Fit my 1990 TriStar perfectly. Made wake big enough for kids and wife to surf. I needed extra 400lb sack in front of engine and way bigger board.