Johnson Talulah Pump - 13.5 GPM - 12 Volt - 14 Amp Draw

Increase the water flow rate in your ballast system, note the high amperage draw 

Features:

• Built in Thermal Overheat Protection: Automatic reset after cooling down
• Monitor Filling: Tanks must have overfill protection
• Retrofit Possible: Important to have full bore hoses – without restriction
• Dry Run Impeller*
• Intermittent Duty
• Important to have good electric installation and proper wire size (Acc. to ISO 10133)
• Recommend fresh batteries and engine running (alternator running) to ensure power supply

*Dry-Run: when the pump runs out of water, still moistened with residual water or lubricated with Johnson Pump Impeller Lube. Maximum dry-run condition of 30 seconds without harming impeller.
 

*NOTICE - WITH 14 AMP DRAW YOU WILL NEED A HIGH CAPACITY ALTERNATOR!

• Amp Draw: 14A
• Fuse Size: 25A
• Degree of Protection: IP 54, Electrical enclosure protected from water intrusion from any direction
• Connection Options: External 1" Standard of 1/2" NPT female connection for smaller hose option