Roswell R1 900.6 Marine Amplifier
Roswell R1 900.6 Marine Amplifier
The R1 900.6 marine-grade amplifier, made by Roswell, is everything your boats audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering your R1 8″ and R1 6.5″ Marine Speaker setup. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCB’s, and nickel-plated marine-grade wire terminals.
Features
- Ch 1-6 calibrated crossover (FULL/HPF/LPF)
- lit logo power indicator lets you know your amp is receiving power
- Bridgeable 6-channel design
- Marine-grade durability
- 2 Ohm Stable at 165 watts per channel
- High-Efficiency Class-D Topology
- Switchable Differential RCA inputs minimize interference and induced noise
- Nickel-plated wire terminals
- Conformal-coated PCBs
- Space-Saving Stackable Design
Specs
| 900.6 |
|
| Continuous power (RMS) | 4Ω: 100W x 6 2Ω: 165W x 6 |
| Bridged | 4Ω: 300W x 3 |
| Input Sensitivity | 0.2 – 10.0V |
| Frequency Response | 10-25 kHz |
| HPF (High Pass Filter) |
30Hz – 300Hz |
| LPF (Low Pass Filter) |
30Hz – 300Hz |
| Bass EQ |
0 ~18dB @ 45Hz |
| Dimensions | Inches: 1.90 x 7.0625 x 13.67 Centimeters: 4.83 x 17.94 x 34.74 |
Roswell R1 900.6 Marine Amplifier
The R1 900.6 marine-grade amplifier, made by Roswell, is everything your boats audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering your R1 8″ and R1 6.5″ Marine Speaker setup. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCB’s, and nickel-plated marine-grade wire terminals.
Features
- Ch 1-6 calibrated crossover (FULL/HPF/LPF)
- lit logo power indicator lets you know your amp is receiving power
- Bridgeable 6-channel design
- Marine-grade durability
- 2 Ohm Stable at 165 watts per channel
- High-Efficiency Class-D Topology
- Switchable Differential RCA inputs minimize interference and induced noise
- Nickel-plated wire terminals
- Conformal-coated PCBs
- Space-Saving Stackable Design
Specs
| 900.6 |
|
| Continuous power (RMS) | 4Ω: 100W x 6 2Ω: 165W x 6 |
| Bridged | 4Ω: 300W x 3 |
| Input Sensitivity | 0.2 – 10.0V |
| Frequency Response | 10-25 kHz |
| HPF (High Pass Filter) |
30Hz – 300Hz |
| LPF (Low Pass Filter) |
30Hz – 300Hz |
| Bass EQ |
0 ~18dB @ 45Hz |
| Dimensions | Inches: 1.90 x 7.0625 x 13.67 Centimeters: 4.83 x 17.94 x 34.74 |