Skip to main content
Free U.S. Shipping on Orders $25+
stamped.io 4 and a half star review rating

990 VERIFIED REVIEWS

Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf
Tige Fresh Air Exhaust Surf Pipe - SWELL Wakesurf

Tige Fresh Air Exhaust Surf Pipe

$630.00

Free U.S. shipping for orders over $25

Amount is calculated after all discounts have been applied to order.
More info on our Shipping Page

Tige Fresh Air Exhaust Surf Pipe

If you've watched any of our boat builds on Youtube, or stopped into our location, we highly recommend installing Fresh Air Exhaust on any inboard boat you plan to surf behind. Our boat builds do not leave without this upgrade. 

Carbon Monoxide poisoning is a big risk behind most of these boats while surfing so close to the boat. Unless you boat is equipped with a catalytic converter, it produces lethal levels of Carbon Monoxide (greater than 10,000 ppm); levels strong enough to cause you to lose consciousness within about 3 minutes. 

Not only is FAE a great upgrade to keep your friends and family safe, but it also reduces the noise behind your boat 50% or more, the cheapest stereo upgrade you can buy!

Performance will not be affected, you can still enjoy all of your favorite watersports without issue! 

Options:

  • Blended welds will have a better finish
  • Flappers - Stock flappers will be removed, generally not necessary due to FAE shape, it is an option to ensure water does not enter your upper engine during a hard stop.
  • Thru Hull Mount - Requires removal of existing exhaust outlets and bolting to hull
  • One Piece Y - Cleaner than 3 Piece typical Design, More OEM look

Installation is simple and typically takes 1-2 hours. Check out our youtube channel for several installation videos. 

**Once purchased we will reach out with a few measurements we will need for your boat. Production time is typically 2-4 weeks, see our FAQ for shipping times.