ACME Harmonic Prop Puller
The Harmonic Prop Pullers are designed for a variety of shaft sizes from 1" to 2 1/2".
Please note: There are two possible prop end, thread size options for 1 1/4" diameter shafts on inboard wake/ski boats (e.g., Malibu, Axis, Centurion, Supreme, Tige, ATX, Pavati) will likely have a 3/4-10 thread size instead of the standard 7/8-9 thread size.
If your inboard wake/ski boat has a 1 ¼” diameter propeller shaft, the thread size of the shaft should be verified, because it impacts choice of prop nuts, prop nut kits and Harmonic pullers.
Acme Part #5005 is a Harmonic Prop Puller with a 3/4-10 thread size (this puller is commonly used on 1”, 1 1/8” and some 1 ¼” diameter shafts which have the non-standard ¾-10 thread size)
Acme Part #5018 is a Harmonic Prop Puller with a 7/8-9 thread size (this puller is commonly used on 1 ¼” shafts with the standard 7/8-9 thread size… e.g., Nautique, MB Sports)
If your wake/ski boat has a 1 1/4" shaft, it is important to verify the thread size at the propeller end of the shaft. You may need the 1 1/4" Special Nut Kit (#5266MAL), or the non-standard nut, part #5003, or the non-standard 5005 Harmonic Prop Puller.
ACME Propellers are on more inboard boats than those of any other manufacturer. They have taken a radical approach to building boat propellers by finding the best available technology for all phases of the production process, concept, design, manufacturing, and testing. ACME then combined these technologies to produce propellers that offer you unmatched performance, uncommon smoothness, and absolute reliability.
All the inboard props made by ACME are forged at their foundry in Michigan then CNC'd to absolute standards out of their custom Nibral metal alloy (special mix of nickel, bronze, and aluminum).
The Harmonic Prop Pullers are designed for a variety of shaft sizes from 1" to 2 1/2".
Please note: There are two possible prop end, thread size options for 1 1/4" diameter shafts on inboard wake/ski boats (e.g., Malibu, Axis, Centurion, Supreme, Tige, ATX, Pavati) will likely have a 3/4-10 thread size instead of the standard 7/8-9 thread size.
If your inboard wake/ski boat has a 1 ¼” diameter propeller shaft, the thread size of the shaft should be verified, because it impacts choice of prop nuts, prop nut kits and Harmonic pullers.
Acme Part #5005 is a Harmonic Prop Puller with a 3/4-10 thread size (this puller is commonly used on 1”, 1 1/8” and some 1 ¼” diameter shafts which have the non-standard ¾-10 thread size)
Acme Part #5018 is a Harmonic Prop Puller with a 7/8-9 thread size (this puller is commonly used on 1 ¼” shafts with the standard 7/8-9 thread size… e.g., Nautique, MB Sports)
If your wake/ski boat has a 1 1/4" shaft, it is important to verify the thread size at the propeller end of the shaft. You may need the 1 1/4" Special Nut Kit (#5266MAL), or the non-standard nut, part #5003, or the non-standard 5005 Harmonic Prop Puller.
ACME Propellers are on more inboard boats than those of any other manufacturer. They have taken a radical approach to building boat propellers by finding the best available technology for all phases of the production process, concept, design, manufacturing, and testing. ACME then combined these technologies to produce propellers that offer you unmatched performance, uncommon smoothness, and absolute reliability.
All the inboard props made by ACME are forged at their foundry in Michigan then CNC'd to absolute standards out of their custom Nibral metal alloy (special mix of nickel, bronze, and aluminum).